UK

This flat roof in Barry in the Vale of Glamorgan was in need of refurbishment as its existing single ply membrane was leaking. With the high winds and rain of Autumn and Winter 2015, this was causing problems for the owners, who needed to find a lasting solution quickly.

We over-coated the roof with a jointless, seamless liquid membrane system which would wholly prevent any further leakage or water ingress, saving electro testing, as well as ensuring the roof would stay leak-free for at least another 20 years.

Want to know more?

This building at Stratford-upon-Avon in Warwickshire required a warm roof with a u value of .13 in order to compensate for an unusually large surface area of glass below (from patio doors & other glass elavations).

The system insulation was 220mm thick, fully adhered, and did not need an extra layer of ply decking to sandwich the insulation, as the insulation we used is specially manufactured to be walked on for limited access without damage.

This onetime-garage flat roof in Comins Coch a mile outside Aberystwyth in West Wales needed to conform to strict U value standards as it was being remodelled as a family kitchen and would be attached to the main property, thus making it a warm roof as well as a flat roof.

The popular 36 room Belle Vue Hotel in Aberystwyth contacted us in desperate need of a new roof for a rear-facing area of the hotel. The existing mastic asphalt roof was blistered and leaking, requiring full re-waterproofing and weatherproofing, all while the hotel remained operational.

This house in Machynlleth in Powys, Mid Wales, needed low cellulose content resin roofing over just one section - an easily accessible flat roof strip running alongside the pitched roof that formed the larger part of a new extension.

The section included a skylight and a few details and joins that provided more of a challenge as they butted up against both the new pitched roof area and an older extension (so that this flat section effectively extended two differently-aged sections of roof, sideways).

This new build in Mold, Flintshire in North Wales needed a balcony surfacing system that would allow building work to continue without long disruption and delay. It was also essential that this area was fully waterproof and watertight quickly in order to keep the underlying fabric dry.

The polymer membrane system was the ideal choice, ensuring the entire balcony area was waterproofed and weatherproofed quickly, and safe to walk on within 6 hours so that work could continue uninterrupted!

Warm Roofs are roofs that meet strict government guidelines for insulation or U-value (read more about warm roofs)

This project in Bow Street near Aberystwyth demonstrates how easy it can be to turn an existing roof into a warm roof - a simple process involving first stripping it down to the joists then fitting perimeter insulation inside the void and cold bridging joist.

The GRP flat roof on this rural Welsh Primary School, on the Powys-Ceredigion border, had severely cracked after the long dry summer due to its age, leaving it in dire need of refurbishment or replacement.

Although the school address was Machynlleth, which is in Powys, the school is technically in Ceredigion therefore it was Ceredigion County Council's responsibility to secure fast repair. Having used us for several school roofing projects previously, they knew our reputation for speed, efficiency and high performance roofing at cost-effective rates, was well deserved.

A recently purchased house in Bow Street Ceredigion, near Aberystwyth, was in immediate need of re-roofing, but after purchase costs the owners were left with a limited budget for works, both on the roof and elsewhere around the house. Because of this, a highly cost effective method was required.

The existing roof consisted of flat mineral felt which, as picture 1 shows, had been replaced in so many sections over the years that it had taken on a "patchwork quilt" effect typical of old and degraded felt roofing.

The Marine Hotel on Aberystwyth's seafront in West Wales, sported various features making it difficult, if not impossible, for most roofers to access without damage. The problem area was a flat roof with air conditioning units on it beneath a fire escape walkway. We were able to strip, refurbish and fully waterproof the ENTIRE area (even WITH the AC units in just 4 days with no damage and no need to call out mechanical engineers to disconnect and recommission the units...

How?